To Next Page

To Previous Page

5 | Operation

User reference guide

EKHWET90~120BAV3

R32 Split series – Domestic hot water tank

4P680076-1 – 2021.11

1 Go to [D.1]: Wireless gateway > Mode.

2 In the Enable AP mode screen, select Yes.

[D.2] Reboot: Reboot the WLAN cartridge:

1 Go to [D.2]: Wireless gateway > Reboot.

2 In the Reboot the gateway screen, select OK.

[D.3] WPS: Connect the WLAN cartridge to the router:

INFORMATION

You can only use this function if it is supported by the software version of the WLAN,

and the software version of the ONECTA app.

1 Go to [D.3]: Wireless gateway > WPS.

2 In the WPS screen, select Yes.

[D.4] Remove from cloud: Remove the WLAN cartridge from the cloud:

1 Go to [D.4]: Wireless gateway > Remove from cloud.

2 In the Remove from cloud screen, select Yes.

[D.5] Home network connection: Read out the status of the connection to the

home network:

1 Go to [D.5]: Wireless gateway > Home network

connection.

2 Read out the connection status:

▪ Disconnected from [WLAN_SSID]

▪ Connected to [WLAN_SSID]

[D.6] Cloud connection: Read out the status of the connection to the cloud:

1 Go to [D.6]: Wireless gateway > Cloud connection.

2 Read out the connection status:

▪ Not connected

▪ Connected

Daikin R32 Split Series User Manual

Other manuals for Daikin R32 Split Series