Daikin Super Multi NX FFQ25B8V1B User Manual

Function of Indoor Unit (RA Models) SiBE121021_C
90 Function and Control
COMFORT
AIRFLOW
Operation
Wall Mounted Type

The fan speed is controlled automatically within the following steps.
Cooling: L tap – MH tap (same as AUTOMATIC)
Heating: ML tap – M tap ~ MH tap (depending on the model)

The latest command has the priority between POWERFUL and COMFORT AIRFLOW.
1.6 Program Dry Operation
Outline Program dry operation removes humidity while preventing the room temperature from lowering.
Since the microcomputer controls both the temperature and airflow rate, the temperature
adjustment and fan adjustment buttons are inoperable in this mode.
Detail The microcomputer automatically sets the temperature and airflow rate. The difference between
the room thermistor temperature at start-up and the target temperature is divided into two
zones. Then, the unit operates in the dry mode with an appropriate capacity for each zone to
maintain the temperature and humidity at a comfortable level.
Room thermistor
temperature at start-up
Target temperature
X
Thermostat OFF point
Y
Thermostat ON point
Z
24°C or more
Room thermistor
temperature at start-up
X
–
2.5°C
X
–
0.5°C
or
Y + 0.5°C (zone B)
continues for 10 min.
23.5°C
X
–
2.0°C
X
–
0.5°C
or
Y + 0.5°C (zone B)
continues for 10 min.
~
18°C
18°C X
–
2.0°C
X
–
0.5°C = 17.5°C
or
Y + 0.5°C (zone B)
continues for 10 min.
17.5°C
~
Z
X
Y
Zone B
Zone B
Zone A = Thermostat OFF
Zone C = Thermostat ON
+0.5˚C
(R11581)

Daikin Super Multi NX FFQ25B8V1B Specifications

General

Brand	Daikin
Model	Super Multi NX FFQ25B8V1B
Category	Air Conditioner
Language	English