Danfoss AK-PC 772A User Manual

66 Capacity controller RS8HF102 © Danfoss 2017-07 AK-PC 772A
Setup Display
1. Go to Configuration menu
2. Select Display setup
3. Define which readings are to be
shown for the individual outputs
In our example, separate displays
are not used. The setting is
included here for information.
3 - Display setup
Display
The following can be read for the four outputs..
Comp. control sensor
P0 in temperature
P0 in bar-
Ss
Sd
Cond. control sensor
Tc
Pc bar
Sgc
Pgc bar
Prec bar
Trec
Speed Compressor
Unit readout
Choose whether readings are to be in SI units (°C and bar) or
(US-units °F and psi)
Configuration - continued

Danfoss AK-PC 772A Specifications

General

Brand	Danfoss
Model	AK-PC 772A
Category	Controller
Language	English