Danfoss ECL 2000 User Manual

Configuring the ECL 2000
EY.65.H4.02
29
Save and Exit
To exit the configuration facility and save the selected settings:
1. Press
until the arrow symbol appears at the top right corner of the dis-
play.
2. Press
again.
If you have selected a different application, or if one of the parameters Sensor, Cir-
cuit or Type has been changed, the ECL 2000 is reset, which takes a few moments.
Meanwhile, the Danfoss logo is shown in the display.

Danfoss ECL 2000 Specifications

General

Brand	Danfoss
Model	ECL 2000
Category	Temperature Controller
Language	English