Danfoss FP715 Si User Manual

26
To set the hot water programme
press the PROG button twice until
SET HW ON TIME appears on the
display.
Set the hot water programme in the
same way as the heating programme,
using:
a) + and - buttons to alter the
time,
b) Pressing the NEXT ON/OFF
button to move to the next
setting,
c) Pressing DAY/HOL to advance
through days of the week (7 day
mode) or to advance to Saturday
and Sunday programming (5/2
day mode) and repeat steps a-c.
Finally press PROG once to return
the unit to run mode (time appears &
colon in the display begins to fl ash).
DAY/HOL
DAY/HOL
DAY/HOL
DAY/HOL
Programming the hot water
Programming hot water
DAY/HOL

Danfoss FP715 Si Specifications

General

Brand	Danfoss
Model	FP715 Si
Category	Temperature Controller
Language	English