Danfoss MCD 600 User Manual

6 Supported Modes
6.1 PROFIBUS Freeze Mode
In Freeze Mode, inputs are only updated with new data from the soft starter when another Freeze action is carried out. An unfreeze
action returns the device to normal operation.
6.2 PROFIBUS Sync Mode
In Sync Mode, commands to the soft starter are not processed until another sync action is carried out. An unsync action returns the
device to normal operation.
6.3 PROFIBUS Clear Mode
If the Master sends a global clear command, the device sends a quick stop command to the soft starter.
Supported Modes
Installation Guide | PROFIBUS Card
AQ277154583779en-000101 / 175R1181 | 17
Danfoss A/S © 2018.09

Danfoss MCD 600 Specifications

General

Brand	Danfoss
Model	MCD 600
Category	Controller
Language	English