TP7001
18
GB
2.0 Advanced Functions
2.1 Mode
The MODE button allows the operation of the programmed events
to be altered between:
1. Auto mode
a. 6 events
b. 4 events
c. 2 events
2. Allday mode
a. Only the rst and last programmed events run
3. Thermostat mode
a. Thermostat mode means that all time pro les are ignored
and the temperature is controlled at whatever temperature is
manually set by the user.
Note: If set for two events per day, then Auto and Allday are e ectively
the same and so the MODE button will only change between Auto
and Thermostat (O ) modes.
When in Auto or Allday modes, the clock symbol is displayed to
indicate the programmed events will be followed.
The TP7001 can be converted to control at a constant user selected
temperature, instead of following the set programme.
Press and hold the and buttons together until the
display changes to the colon ashing and default frost
temperature (5°C).
Press the or buttons to alter temperature as
required.
NOTE: The unit will remain in thermostat mode until
and are pressed and held together again.
2.2 Thermostat mode
To Next Page
Loading...
Need help?
General
