To Next Page

To Previous Page

TP9000

Hot Water

Note: If set up for two on/oﬀ events per day, events 3 and 4 are skipped.

If set up for one on/oﬀ event per day, events 2, 3, 4 & 5 are skipped. In

both cases the events are re-numbered.

Customising the display

For the sake of clarity, the instructions assume that the display setting

uses a 24 hour clock, °C and that days of the week are shown as text.

All of these settings can be personalised after the thermostat has been

programmed, see page 27

Setting the correct date and time

Your TP9000 incorporates a real time clock with calendar function that

automatically changes time in both Spring and Autumn. The time and

date is set in the factory for the UK time zone, and does not normally

require adjustment. If you live in another time zone refer to “Time zone

oﬀ set” on page 34. However, should it be found necessary to adjust

time or date for any other reason refer to the following instructions.

Weekdays (Mon-Fri) Weekend (Sat-Sun)

Event Time Temp. °C Event Time Temp. °C

1 06:30 On 1 07:30 On

2 08:30 Oﬀ 2 09:30 Oﬀ

3 11:30 On 3 11:30 On

4 13:30 Oﬀ 4 13:30 Oﬀ

5 16:30 On 5 16:30 On

6 22:30 Oﬀ 6 22:30 Oﬀ

Note: these are also times for

Block “A” programmes

Note: these are also times for

Block “B” programmes

Danfoss TP9000 User Manual

Other manuals for Danfoss TP9000