Danfoss VLT 2030 User Manual

MG.20.B6.02 – VLT is a registered Danfoss trademark
VLT
®
2000 Series
8
Electrical installation (continued)
Item 4 Control cables
The cables used for control cables must be
screened to comply with the stated EMC emission
specifications. Connect the screen from the control
cables to terminal 61 (ground).
Observe the following max. cross sections for control
cables:
That I have done
Mains supply 1 x 220/230/240 V
3 x 208/220/230/240 V
VLT 2010 Max. 1.5 mm
2
VLT 2015 Max. 1.5 mm
2
VLT 2020 Max. 1.5 mm
2
VLT 2030 Max. 1.5 mm
2
VLT 2040 Max. 1.5 mm
2
VLT 2050 Max. 1.5 mm
2
Mains supply 3 x 380-460 V
VLT 2020 Max. 1.5 mm
2
VLT 2025 Max. 1.5 mm
2
VLT 2030 Max. 1.5 mm
2
VLT 2040 Max. 1.5 mm
2
VLT 2050 Max. 1.5 mm
2
VLT 2060 Max. 1.5 mm
2
Installation
Cable relief fitting
195H6129
▲▲
▲▲
▲
■

Danfoss VLT 2030 Specifications

General

Brand	Danfoss
Model	VLT 2030
Category	Inverter
Language	English