Danfoss VLT 5000 Series Operating Instructions

VLT
®
5000 Series
Description of choice:
See parameter 300.
305 Terminal 29, input
(DIGITAL INPUT 29)
Value:
See parameter 300.
Function:
This parameter allows a choice between the
different options on terminal 29. The functions are
shown in the table at the beginning of the section
Parameters - Inputs and Outputs.
Maximum frequency for terminal 29 is 65 kHz.
Description of choice:
See parameter 300.
306 Terminal 32, input
(DIGITAL INPUT 32)
Value:
See parameter 300.
Function:
This parameter allows a choice between the
different options on terminal 32. The functions are
shown in the table at the beginning of the section
Parameters - Inputs and Outputs.
Maximum frequency for terminal 32 is 65 kHz.
Description of choice:
See parameter 300.
307 Terminal 33, input
(DIGITAL INPUT 33)
Value:
See parameter 300.
Function:
This parameter allows a choice between the
different options on terminal 33. The functions are
shown in the table at the beginning of the section
Parameters - Inputs and Outputs.
Maximum frequency for terminal 33 is 65 kHz.
Description of choice:
See parameter 300.
Analogue inputs terminal no. 53(voltage) 54(voltage) 60(current)
parameter 308 311 314
Value:
No operation (NO OPERATION) [0] [0]✭ [0]
Reference (REFERENCE) [1] ✭ [1] [1] ✭
Feedback signal (FEEDBACK) [2] [2]
Torque limit (TORQUE LIMIT CTRL) [3] [2] [3]
Thermistor (THERMISTOR INPUT) [4] [3]
Relative reference (RELATIVE REFERENCE) [4] [4]
Max. torque frequency (MAX. TORQUE FREQ.) [5]
✭ = factory setting. () = display text [] = value for use in communication via serial communication port
MG.51.A9.02 - VLT is a registered Danfoss trademark
126

Danfoss VLT 5000 Series Specifications

General

Brand	Danfoss
Model	VLT 5000 Series
Category	DC Drives
Language	English