Danfoss vlt aqua Programming Guide

1.1.8. Main Menu Mode
Both the GLCP and NLCP provide access to the
main menu mode. Select the Main Menu mode
by pressing the [Main Menu] key. Illustration
6.2 shows the resulting read-out, which ap-
pears on the display of the GLCP.
Lines 2 through 5 on the display show a list of
parameter groups which can be chosen by
toggling the up and down buttons.
1
30BP066.10
Illustration 1.9: Display example.
Each parameter has a name and number which remain the same regardless of the programming
mode. In the Main Menu mode, the parameters are divided into groups. The first digit of the
parameter number (from the left) indicates the parameter group number.
All parameters can be changed in the Main Menu. The configuration of the unit (par.1-00) will
determine other parameters available for programming. For example, selecting Closed Loop en-
ables additional parameters related to closed loop operation. Option cards added to the unit enable
additional parameters associated with the option device.
1.1.9. Parameter Selection
In the Main Menu mode, the parameters are
divided into groups. Select a parameter group
by means of the navigation keys.
The following parameter groups are accessi-
ble:
Group no. Parameter group:
0 Operation/Display
1Load/Motor
2 Brakes
3 References/Ramps
4 Limits/Warnings
5Digital In/Out
6 Analog In/Out
8 Comm. and Options
9 Profibus
10 CAN Fieldbus
11 LonWorks
13 Smart Logic
14 Special Functions
15 Drive Information
16 Data Readouts
18 Data Readouts 2
20 Drive Closed Loop
21 Ext. Closed Loop
22 Application Functions
23 Time-based Functions
24 Fire Mode
25 Cascade Controller
26 Analog I/O Option MCB 109
Table 1.2: Parameter groups.
After selecting a parameter group, choose a
parameter by means of the navigation keys.
The middle section on the GLCP display shows
the parameter number and name as well as
the selected parameter value.
1
30BP067.10
Illustration 1.10: Display example.
VLT
®
AQUA Drive Programming Guide 1. How to Programme
MG.20.O2.02 - VLT
®
is a registered Danfoss trademark 19
1

Danfoss vlt aqua Specifications

General

Brand	Danfoss
Model	vlt aqua
Category	DC Drives
Language	English