Danfoss vlt aqua Programming Guide

Reset 9
Reset Control Timeout, 8-06 109
Reset Energy Log, 23-54 221
Reset Key On Lcp, 0-43 39
Reset Kwh Counter, 15-06 153
Reset Mode, 14-20 145
Reset Relay Counters, 25-86 243
Reset Running Hours Counter, 15-07 153
Reversing Select, 8-54 113
Rfi, 14-50 149
Running Hours, 15-01 152
S
Samples Before Trigger, 15-14 156
Sbw Destaging Delay, 25-24 232
Sbw Staging Delay, 25-23 231
Semi-auto By-pass Feature, 4-64 75
Service Code, 14-29 148
Set Date And Time, 0-70 42
Setpoint 1, 20-21 180
Setpoint 2, 20-22 180
Setpoint 3, 20-23 180
Short Cycle Protection 206
Short Cycle Protection, 22-75 206
Sl Controller Mode, 13-00 132
Slave Error Count, 8-83 114
Slave Message Count, 8-82 114
Sleep Mode 201
Special Functions 143
Speed At Design Point [hz], 22-86 210
Speed At Design Point [rpm], 22-85 210
Speed At No-flow [hz], 22-84 210
Speed At No-flow [rpm], 22-83 209
Square-linear Curve Approximation, 22-81 208
Staging Bandwidth, 25-20 229
Staging Speed, 25-44 236
Staging Threshold, 25-42 234
Start Delay 52
Start Event, 13-01 132
Start Select, 8-53 112
Stator Leakage Reactance 16, 48
Stator Resistance Rs, 1-30 49
Status 6
Status Messages 3
Step Size 68
Step-by-step 20
Store Always 10-33 131
Store Data Values 10-31 130
Sw Id Control Card, 15-49 159
Sw Id Power Card, 15-50 159
Sw Version, 15-43 158
Switching Frequency, 14-01 143
Switching Pattern, 14-00 143
T
Telegram Selection, 8-40 111
Term. 29 High Ref./feedb. Value, 5-53 92
Term. 29 Low Frequency 92
Term. 29 Low Ref./feedb. Value, 5-52 92
Term. 33 Low Frequency, 5-55 92
Terminal 19 Digital Input, 5-11 82
Terminal 27 Digital Input, 5-12 83
Terminal 27 Pulse Output Variable, 5-60 94
Terminal 29 Digital Input, 5-13 83
Terminal 29 Mode, 5-02 77
Index VLT
®
AQUA Drive Programming Guide
296 MG.20.O2.02 - VLT
®
is a registered Danfoss trademark

Danfoss vlt aqua Specifications

General

Brand	Danfoss
Model	vlt aqua
Category	DC Drives
Language	English