Danfoss vlt aqua User Manual

5.1.3 Q1 My Personal Menu
Parameters defined by the user can be stored in Q1 My Personal Menu.
Select
My Personal Menu to display only the parameters, which have been pre-selected and programmed as personal parameters. For example, a pump
or equipment OEM may have pre-programmed these to be in My Personal Menu during factory commissioning to make on-site commissioning / fine tuning
simpler. These parameters are selected in par. 0-25
My Personal Menu . Up to 20 different parameters can be defined in this menu.
Q1 My Personal Menu
20-21 Setpoint 1
20-93 PID Proportional Gain
20-94 PID Integral Time
5.1.4 Q2 Quick Set-up
The parameters in Q2 Quick Set-up are the basic parameters which are always needed to set up the adjustable frequency drive for operation.
Q2 Quick Set-up
Parameter number and name Unit
0-01 Language
1-20 Motor Power kW
1-22 Motor Voltage V
1-23 Motor Frequency Hz
1-24 Motor Current A
1-25 Motor Nominal Speed RPM
3-41 Ramp 1 Ramp-up Time s
3-42 Ramp 1 Ramp-down Time s
4-11 Motor Speed Low Limit RPM
4-13 Motor Speed High Limit RPM
1-29 Automatic Motor Adaptation (AMA)
VLT AQUA High Power Instruction Manual
5 How to program the adjustable frequency
drive
MG.20.P3.22 - VLT
®
is a registered Danfoss trademark 5-3
5

Danfoss vlt aqua Specifications

General

Brand	Danfoss
Model	vlt aqua
Category	DC Drives
Language	English