Danfoss VLT CANopen MCA 105 User Manual

•
•
•
•
•
•
•
•
•
•
•
8 Wiring Configuration Examples
8.1 Application Examples
The examples in this section are intended as a quick reference for common applications.
Parameter settings are the regional default values selected in parameter 0-03 Regional Settings, unless otherwise indicated.
Parameters associated with the terminals and their settings are shown next to the drawings.
Required switch settings for analog terminals A53 or A54 are also shown.
8.1.1 Programming a Closed-loop Drive System
A closed-loop drive system usually consists of:
Motor.
Drive.
Encoder (as feedback system).
Mechanical brake.
Brake resistor (for dynamic braking).
Transmission.
Gear box.
Load.
Applications demanding mechanical brake control typically need a brake resistor.
e30bt865.10
Encoder
Mechanical brake
Motor
Gearbox
Load
Transmission
Brake resistor
Illustration 66: Basic Setup for Closed-loop Speed Control
AQ262139143212en-000301 / 130R0879122 | Danfoss A/S © 2021.10
Wiring Configuration Examples
VLT® AutomationDrive FC 302
Operating Guide

Danfoss VLT CANopen MCA 105 Specifications

General

Brand	Danfoss
Model	VLT CANopen MCA 105
Category	DC Drives
Language	English