Danfoss VLT FC 102 N500 User Manual

4.
5.
6.
Connect the ground wire to the nearest grounding terminal in accordance with the grounding instructions provided in
5.8.6 Connecting to Ground.
Connect the 3-phase AC motor cables to terminals U (T1), V (T2), and W (T3).
Tighten the terminals in accordance with the specications shown in 10.11 Fastener Torque Ratings.
Example
e30bu171.10
1
3
4
5
6
2
Illustration 50: Connection Points for Drive Module to Motor (E6h Model Shown)
1
Lower cover
2
DC terminals
3
Terminal cover
4
Motor terminals
5
Ground terminals on drive module
6
Grounding bar
5.8.4 Connecting the Sine-wave Filter to the Motor
AQ357954340588en-000201 / 130R0881 | 85Danfoss A/S © 2020.09
Electrical Installation
VLT® Refrigeration Drive FC 103
Operating Guide

Danfoss VLT FC 102 N500 Specifications

General

Brand	Danfoss
Model	VLT FC 102 N500
Category	DC Drives
Language	English