Danfoss VLT FC 360 User Manual

3.4.6 The Data Field
The structure of data blocks depends on the type of telegram. There are three telegram types, and the type applies for both
control telegrams (master⇒slave) and response telegrams (slave⇒master).
The 3 types of telegram are:
Process block (PCD)
The PCD is made up of a data block of 4 bytes (2 words) and contains:
- Control word and reference value (from master to slave)
- Status word and present output frequency (from slave to master)
ADRLGESTX PCD1 PCD2 BCC
130BA269.10
Illustration 3.4 Process Block
Parameter block
The parameter block is used to transfer parameters between master and slave. The data block is made up of 12 bytes (6
words) and also contains the process block.
PKE INDADRLGESTX PCD1 PCD2 BCC
130BA271.10
PWE
high
PWE
low
Illustration 3.5 Parameter Block
Text block
The text block is used to read or write texts via the data block.
PKE IND
130BA270.10
ADRLGESTX PCD1 PCD2 BCCCh1 Ch2 Chn
Illustration 3.6 Text Block
3.4.7 The PKE Field
The PKE field contains two subfields: Parameter command
and response (AK) and Parameter number (PNU):
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
130BB918.10
PKE IND
PWE
high
PWE
low
AK PNU
Parameter
commands and replies
Parameter number
Illustration 3.7 PKE Field
RS-485 Installation and Set...
VLT
®
AutomationDrive FC 360 Design Guide
44 MG06B202 - VLT
®
is a registered Danfoss trademark
3
3

Danfoss VLT FC 360 Specifications

General

Brand	Danfoss
Model	VLT FC 360
Category	DC Drives
Language	English