Danfoss VLT MCD 201 User Manual

Danfoss Drives · DKDD.PB.551.A1.02 | 47
MCD500
Cat. No: 175G0096
(Auto On mode)
Notes
• MCD LCP 501 includes one LCP and complete mounting kit (3
metre cable, gasket, screws).
• No set-up or configuration is required for the Control Panel VLT®
LCP 501. No external power is required.
• Control Panel VLT® LCP 501 can be used to transfer parameters
between multiple starters with the same software version.
• Control Panel VLT® LCP 501 is not compatible with MCD 200 soft
starters.
• Upgrade kit is available to enable use with MCD 500 v9 and
earlier.

Danfoss VLT MCD 201 Specifications

General

Brand	Danfoss
Model	VLT MCD 201
Category	Controller
Language	English