Datacard® SR200 & SR300 Printer
Hardware and Driver Installation Manual 43
Removing the Status Monitor
Remove the Status Monitor after removing the driver.
1. Begin with the Card Printer installation window open.
2. Make sure the following are selected, and then click Next:
• Uninstall
• Status Monitor
3. Click OK.
4. If an uninstall dialog opens, click Yes to continue.
5. Click Finish. The Status Monitor shortcuts and files are removed from the PC.
6. Click Exit to close the Card Printer window.
7. Restart Windows.
To Next Page
Loading...
Need help?
General
