Datalogic Magellan 2200VS User Manual

DataBar Omnidirectional Enable
Product Reference Guide 273
DataBar Omnidirectional Enable
Enables/disables the ability of the scanner to decode DataBar Omnidirec-
tional labels.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
DataBar Omnidirectional = DISABLE
DataBar Omnidirectional = ENABLE
NOTE
This value-added feature is a factory-programmed option. Contact
your dealer for information about upgrading your system to include
this advanced capability.

Datalogic Magellan 2200VS Specifications

General

Decoding standards	-1D + GS1 DataBar, -GS1 DataBar Expanded Stacked, -GS1 DataBar Stacked, -GS1 DataBar Stacked Omnidirectional.
Standard interfaces	USB, RS-232
Dimensions (WxDxH)	152 x 152 x 97 mm
Product color	Gray
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-10 - 40 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Weight	1100 g