CONFIGURATION USING CODE SYMBOLS
109
4.3.4 Mismatch Result
The result of each format may be set in case the match conditions previously
selected are not satisfied.
Once the desired formats have been enabled and a code has been read, the results
corresponding to each format will be concatenated together and transmitted in the
output message. For this reason, it is strongly advised to set the mismatch result for
each format.
Example
Decoded Code: <DATALOGICproduct>
Format definition:
Format Enable/Disable Match Condition Function Mismatch Result
Format 1 Enabled Code having a length
of 16 characters
Select field from
position1 to
position3
No string
Format 2 Disabled / / /
Format 3 Enabled Code having a length
of 25 characters
Substitute string
"ab" with string
"12"
Unformatted read
code
Format 4 Enabled Code having the
substring "AT" in
position 2
Insert string
"789" in position
7
Unformatted read
code
Format 5 Enabled Code belonging to the
PDF417 symbology
Delete string
"DA" and "pr"
Unformatted read
code
Output message
: <DATDATALOGICproductDATALO789GICproductDATALOGICproduct>
Format 1 Format 3 Format 4 Format 5
Define Mismatch Result
Mismatch Result
AOCLFLHODNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEFGEIK
AKCBPJCJGIIJCMCFHPJPBJONNK
AEFBJLBGMHPKMJGONHLFIIIHGK
AAPHBAJJCDBDNKDEDGEINLGHBK
AFLFAMLJPMLKOLLPNDLGCBAIIK
DLDLLDLDDLLLLLLDDDLDDLDLDL
Read the above code and:
1. read a number in the range 1-5 corresponding to the
desired format number;
2. 0 = empty string as output
1 = unformatted read code as output.
To Next Page
Loading...
Need help?
General
