POWERSCAN® D8530
14
Make all PC system connections
as shown in Figure 5:
4.
Figure 5 – PC Wedge Connection
5.
Power up your PC.
CAUTION
When not using the PowerScan® D8530 reader remember to
disconnect the Wedge interface from the PC before disconnecting
the power cord.
NOTE
While using the PowerScan® D8530 it is always necessary to use
cables adopting an external power supply.
3.3 USB INTERFACE SELECTION
The PowerScan® D8530 reader requires the USB interface cable and the AC/DC
power adapter to be connected.
The USB interface is compatible:
Windows 98 (and later) IBM POS for Windows
Mac OS 8.0 (and later) 4690 Operating System
To install and configure your reader with one of the USB interfaces, follow these
instructions.
Make all the PowerScan® D8530 reader
connections as shown in Figure 6;
1.
To Next Page
Loading...
Need help?
General
