Enter/Exit Programming Mode Industrial 2 of 5
210 QuickScan™ I QD21X1 / QM21X1 / QBT21X1
Industrial 2 of 5 Set Length 2
This feature specifies one of the bar code lengths for Industrial 2 of 5 Length
Control on page 208. Length 2 is the maximum label length if in Variable
Length Mode, or the second fixed length if in Fix
ed Length Mode. Length
includes the bar code’s check, data, and full-ASCII shift characters.
The length can be set from 1 to 50 char
acters. The length includes check and
data characters. A setting of 00 specifies to ignore this length (only one fixed
length). See "Set Length 2" on
page 307 for more detailed programming
instructions.
Select Industrial 2 of5 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
CANCEL
$CU2L2
~
DEFAULT
50 = Length 2 is 50 Characters
To Next Page
Loading...
Need help?
General
