Enter/Exit Programming Mode Code 93
226 QuickScan™ I QD21X1 / QM21X1 / QBT21X1
Code 93 Set Length 2
This feature specifies one of the bar code lengths for Code 93 Length Control
on page 224. Length 2 is the maximum label length if in Variable Length on
page 224 Mode, or the second fixed length if in Fixed Length on
page 224
Mode. Length includes the bar code’s chec
k, data, and full-ASCII shift charac-
ters. The length does not include start/stop characters.
The length can be set from 1 to 50 characters. A setting of 00 specifies to
ig
nore this length (only one fixed length). See "Set Length 2" on
page 307 for
more detailed programming instructions.
Select Code 93 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
CANCEL
$CC9L2
~
DEFAULT
50 = Length 2 is 50 Characters
To Next Page
Loading...
Need help?
General
