Datalogic QuickScan Lite QW2100 Quick Reference Guide

22 QuickScan
TM
Lite QW2100
Software Product Policy
Datalogic reserves the right to ship its products with the
latest version of software/firmware available. This pro-
vides our customers with the very latest in Datalogic
software technology.
The only exception to this policy is when the buyer has a
signed contract with Datalogic that clearly defines the
terms and conditions for making software/firmware
changes in products shipped to the buyer.
To arrange for a Software Maintenance and Support
Agreement please contact your Datalogic sales person.
Hands Free Stand/Holder
An accessory is available which holds the
reader at a convenient angle, allowing
hands free scanning of items. It can also
be used as a holder. Always press in on
the release buttons on both sides of the
stand to raise the arm of the stand as
shown in the inset of
Figure 1, otherwise
you could damage the locking mechanism. The holder
“cup” can be positioned in any of the three angles shown
in the figure.
Refer to
Scanning Modes on page 30 for information
about programming the reader for use with the stand.
Figure 1. Adjusting the Stand
Optional Wall
Mount Holder

Datalogic QuickScan Lite QW2100 Specifications

General

Type	Handheld bar code reader
Wavelength	650 nm
Sensor type	Laser
Read rate (max)	400 reads/s
Yaw reading angle	-70 - 70 °
Tilt reading angle	-45 - 45 °
Pitch reading angle	-65 - 65 °
Linear (1D) barcodes supported	EAN 5, EAN-13, EAN-8, GS1-128 (UCC/EAN-128)
2D (matrix & stacked) barcodes supported	Not supported
Standard interfaces	USB
Connectivity technology	Wired
Input voltage	5 V
Power consumption	340 mA
Power source type	DC
Product color	Black
Housing material	-
International Protection (IP) code	IP42
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	65 mm
Width	170 mm
Height	70 mm
Weight	119 g