Datalogic QuickScan Lite QW2100 Quick Reference Guide

26 QuickScan
TM
Lite QW2100
Parts of the Reader
Programming Bar Codes
For your convenience, this guide includes the program-
ming bar codes required to configure the reader for use
with different interface (terminal/host) types.
See the Product Reference Guide (PRG) for more com-
plete information about programming and configurable
features. You can download the latest version of the PRG
and any other available publications for the reader from
the website listed on the back cover of this manual.
Resetting the Standard Product Defaults
If you aren’t sure what programming options are in your
reader, or you’ve changed some options and want the
factory settings restored, scan the Factory Default Set-
tings bar code below. This will copy the factory configu-
ration for the currently active interface to the current
configuration.
Factory Default Settings
1. LED 3. Scan Window
2. Cable Release Hole 4. Trigger
1
2
3
4

Datalogic QuickScan Lite QW2100 Specifications

General

Type	Handheld bar code reader
Wavelength	650 nm
Sensor type	Laser
Read rate (max)	400 reads/s
Yaw reading angle	-70 - 70 °
Tilt reading angle	-45 - 45 °
Pitch reading angle	-65 - 65 °
Linear (1D) barcodes supported	EAN 5, EAN-13, EAN-8, GS1-128 (UCC/EAN-128)
2D (matrix & stacked) barcodes supported	Not supported
Standard interfaces	USB
Connectivity technology	Wired
Input voltage	5 V
Power consumption	340 mA
Power source type	DC
Product color	Black
Housing material	-
International Protection (IP) code	IP42
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	65 mm
Width	170 mm
Height	70 mm
Weight	119 g