Datalogic QuickScan Lite QW2100 Quick Reference Guide

34 QuickScan
TM
Lite QW2100
Ergonomic Recommendations
• Reduce or eliminate repetitive motion
• Maintain a natural position
• Reduce or eliminate excessive force
• Keep objects that are used frequently within easy reach
• Perform tasks at correct heights
• Reduce or eliminate vibration
• Reduce or eliminate direct pressure
• Provide adjustable workstations
• Provide adequate clearance
• Provide a suitable working environment
• Improve work procedures.
Regulatory Information
All models are designed to be compliant with rules and
regulations in locations they are sold and will be labeled
as required.
Any changes or modifications to equipment, not ex-
pressly approved by Datalogic could void the user's au-
thority to operate the equipment.
Power Supply
Use only a power supply approved by Datalogic for this
product and model. Models require either a Listed class
II or class
III with a Limited Power Source(LPS) which supplies
power directly to the reader. For the safety certification
to be valid, class
III input power sources must be IEC/EN60950-1 (EN
60335-series, EN 60065 or relevant) approved.
Input: 100 - 240 VACOutput: 5 VDC
Max Current: 0.35 AmpsPower Out: 12.5 Watts
CAUTION
In order to avoid or minimize the potential
risk of ergonomic injury follow the recom-
mendations below. Consult with your local
Health & Safety Manager to ensure that
you are adhering to your company’s safety
programs to prevent employee injury.
NOTE
For USB Power Off Terminal applications,
attach to USB 1.0, 1.1 or 2.0 host device
only.

Datalogic QuickScan Lite QW2100 Specifications

General

Type	Handheld bar code reader
Wavelength	650 nm
Sensor type	Laser
Read rate (max)	400 reads/s
Yaw reading angle	-70 - 70 °
Tilt reading angle	-45 - 45 °
Pitch reading angle	-65 - 65 °
Linear (1D) barcodes supported	EAN 5, EAN-13, EAN-8, GS1-128 (UCC/EAN-128)
2D (matrix & stacked) barcodes supported	Not supported
Standard interfaces	USB
Connectivity technology	Wired
Input voltage	5 V
Power consumption	340 mA
Power source type	DC
Product color	Black
Housing material	-
International Protection (IP) code	IP42
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	65 mm
Width	170 mm
Height	70 mm
Weight	119 g