Linking the Reader
Quick Reference Guide 13
Variable PIN Code
Some Bluetooth drivers on the Host (such as WIDCOMM
and BlueSoleil 8) require a Variable PIN Code. When
attempting connection, the application presents a window
that includes a PIN Code which is to be input using the
QBT21X1. Please read the bar code "Variable PIN Code"
and restart the sequence from step 2 above.
Variable PIN Code
When you hear the beep and see the Green LED blinking
indicating the reader is waiting for an alphanumeric entry,
enter the required variable PIN Code by scanning the cor-
responding bar codes in the “Hex-Numeric Keypad” sec-
tion at the back of this manual for alphanumeric entry.
Finish by scanning the
Exit HID Variable PIN Code
label.
Exit HID Variable PIN Code
HID Country Mode
When the Reader is connected with a Bluetooth Adapter
in HID mode, you may want to set the country for which
your PC is localized. Go to "Country Mode" on page 16” and
read one of the configuration command labels.
HID Caps Lock State
This option specifies the format in which the reader send-
character data. See "Caps Lock State" on page 20 for program-
ming labels.
To Next Page
Need help?
General
