Datamax A-Class A-4212 User Manual

108 A-Class
Warning Messages Fault Messages (continued)
Displayed Message Description Possible Solution(s)
INVALID ENTRY
The selection you are
attempting to make is not
valid or is not within the
acceptable parameter
range.
Enter a different setting or
parameter that falls within the
acceptable range.
LOW VOLTAGE
The printer has detected a
low operating voltage.
Possible low or fluctuating line
voltage levels have been
sensed. If the condition
persists, try moving the printer
to another outlet, or call for
service.
RIBBON LOW
The ribbon supply is
almost empty.
Load ribbon soon.
RTC RAM FAILURE
The printer was unable to
save settings in permanent
memory.
Possible faulty Main Logic CCA.
Retry your save. If the
condition persists, call for
service.
TEMPERATURE PAUSE
A high printhead
temperature has been
detected.
Wait for the printhead to cool.
Afterward, when the printhead
reaches an acceptable
temperature, printer operations
will automatically resume.
Fault Messages
These high priority messages alert you to a printer fault condition. (Alternate
messages may occur when downloading font, firmware, or Boot Loader files.)
;
To return operation after a fault occurs, the fault must be corrected and the FEED
Key pressed.

Datamax A-Class A-4212 Specifications

General

Brand	Datamax
Model	A-Class A-4212
Category	Label Maker
Language	English