Datamax A-Class A-4212 User Manual

A-Class 85
5.3.2 Burn Line Adjustment
Adjust the Burn Line only after trying suggestions in Sections 5.3.1 and 3.5 to achieve print
conformance and aesthetic standards. If print quality remains unacceptable, adjust the Burn
Line as follows:
;
If you have questions regarding this procedure, contact a qualified technician or
Datamax
Technical Support before proceeding.
1.
Load media (and ribbon, if required), as described in Section 3.1.
2. Loosen the two Locking Screws on the Printhead Assembly approximately ¼ turn
counterclockwise.
Printhead Assembly
Locking Screws
Adjustment Screws
3. Turn the Adjustment Screws counterclockwise to bring the printhead burn line (see
illustration, Section 5.5.1) forward (in the FEED direction) of the top of the platen.
4. Print a Validation Label; see Section 4.3.4. (The label should have a light, uneven
appearance.)

Datamax A-Class A-4212 Specifications

General

Brand	Datamax
Model	A-Class A-4212
Category	Label Maker
Language	English