To Next Page

To Previous Page

Presets

Saving Presets

Up to 5 user presets can be stored in the AFS2 for later recall. When saving presets, the following settings will be saved:

• All Set Fixed Filters (Gain/Q/Frequency values)

• Fixed Filters Parameter Setting (number of Fixed vs. Live filters)

• Content Mode Parameter Setting (filter width)

• Live Lift Enable Parameter Setting

• Lift Time Parameter Setting

• Stereo Link Parameter Setting

• Virtual High Pass Parameter Setting

• Sensitivity Parameter Setting

To save a preset:

1� From the Home Screen, press the BACK/MENU button.

2� Turn the DATA wheel to select the PRESET MENU option then press the DATA wheel to advance.

3� Turn the DATA wheel to select the SAVE PRESET option then press the DATA wheel to advance.

4� Turn the DATA wheel to select the preset memory location at which the preset will be saved.

NOTE: Any settings currently saved to the selected preset will be overwritten.

5� Press the DATA wheel to save the settings to the selected preset location.

Loading Presets

To load a preset:

1� From the Home Screen, press the BACK/MENU button.

2� Turn the DATA wheel to select the PRESET MENU option then press the DATA wheel to advance.

3� Select the LOAD PRESET option then press the DATA wheel to advance.

4� Turn the DATA wheel to select the preset to load.

5� Press the DATA wheel to load the selected preset.

dbx AFS2 User Manual

Other manuals for dbx AFS2