30
Specifications
ANALOG INPUTS:
Number of Inputs: 2
Connectors: Female XLR and 1/4" TRS
Type: Electronically balanced/unbalanced, RF filtered
Impedance: Balanced 50kΩ, Unbalanced 25kΩ
Max input line level: +20dBu
CMRR: >40dB, typically >55dB @ 1kHz
ANALOG OUTPUTS:
Number of Outputs: 2
Connectors: Male XLR and 1/4" TRS
Type: Electronically balanced/unbalanced, RF filtered
Impedance: Balanced >120Ω, unbalanced >60Ω
Max Output Level: +20dBu
A/D PERFORMANCE:
Type: dbx Type IV™ conversion system
Dynamic Range: >110dB A-weighted, >107dB unweighted, 22kHz BW
Type IV™ dynamic range: >119dB, A-weighted, 22kHz BW
>117dB, unweighted, 22kHz BW
A/D Conversion: 24-bit
D/A PERFORMANCE:
Dynamic Range: 112dB A-weighted, 109dB unweighted
D/A Conversion: 24-bit
SYSTEM PERFORMANCE:
Sample Rate: 48kHz
Dynamic Range: >107dB A-weighted, >104dB unweighted, 22kHz BW
THD+N: 0.004% typical at 1Vrms input, 1KHz at +4 dBu
0.006% typical at 0.2Vrms input, 1KHz at -10 dBV
Frequency Response: 20Hz – 20kHz, +/- 1.0dB
Interchannel Crosstalk: >100dB typical
Crosstalk input to output: >100dB typical
POWER
Operating Voltage: 100-240VAC, 50Hz/60Hz
Power Consumption: 8 Watts
PHYSICAL
Unit Weight: 4.5 lbs. (2.04 kg)
Dimensions: 1.75" (H) x 5.875" (D) x 19" (W)
4.45cm (H) x 14.92cm (D) x 48.26cm (W)
Specifications are subject to change without notice.
To Next Page
Loading...
Need help?
General
