CLI reports unsupported features
Issue: Several commands, options, or other features listed by the CLI state that they are unsupported when run.
Probable Cause: CLI shows the same information on all Marvell products, but only implements the functions which are pertinent to
that platform or system.
Corrective Action: Use supported features.
Failure to install ESXi on RAID 1
Issue: Attempting to install ESXi on a RAID 1 results in an invalid partition table error.
Probable Cause: If an uncongured physical disk containing an ESXi partition is used in a virtual disk, any attempts to install a
partition of ESXi on this virtual disk will raise an error due to failure to clear out the previous partition.
Corrective Action: Delete the existing RAID 1, run erase physical disk on both drives, re-create the RAID 1 with quick
initialization ON, then attempt to reinstall ESXi on the virtual disk.
System not responding
Issue Systems with ESXi OS stops responding.
Corrective Action: Ensure that the latest version of ESXi OS is installed.
Management port not responding
Issue
BOSS-S1 management port not responding in ESXi.
Corrective Action: Ensure that the latest version of ESXi OS is installed.
Troubleshooting 31
To Next Page
Loading...
Need help?
General