Diagnostics—E340 and E342n
2-61
50 PPDS
Font Error
This message displays when the PPDS
interpreter has encountered a font error.
Note: This error may only occur when the
PPDS compiler requests a font which is not
present or is not installed.
The following actions may be taken:
•Press Go to clear the message and
continue processing the job.
•Press Menu until Job Menu appears. The
following are available:
– Cancel Job
– Reset Printer
51 Defective
Flash
This message displays when the printer
detects a defective flash. This error may occur
at power on, or during flash format and write
operations. Press Go to clear the message.
The flash is marked as bad, and normal
operation continues. Flash operations are not
allowed until the problem is resolved.
52 Flash Full This message displays when there is not
enough free space in the flash memory to hold
the resources that have been requested to be
written to flash.
The following actions may be taken:
•Press Go to clear the message and
continue processing the job.
•Press Menu until Job Menu appears. The
following are available:
– Cancel Job
– Reset Printer
53 Unformatted
Flash
This message displays when the printer
detects an unformatted flash at power on.
Press Go to clear the message. The flash is
marked as bad, and normal operation
continues. Flash operations are not allowed
until the flash is formatted.
User attendance messages (continued)
Message Explanation