Dell 3115CN User Manual

2 - 18
Chapter 2 Operation of Diag.
Version 1 2006.11.21
4.3 IOT Diag
4.3.1 Digital Input (DI) Test
This function checks whether the DI components operate normally or not.
The DI test is performed for all the DI components.
Exit operation of the DI test makes the control panel display the Customer diag. function menu.
During the DI test, other Customer diag. functions can not be performed simultaneouly.
Therefore, the printer does not accept any operation except operations for the DI compo-
nents and exit operation of the DI test.
At the start of the DI test, number “ 0 ” is displayed on the control panel. This number is counted
up when a DI component is turned on from off, therefore it allows the user to know the component
is active.
When a paper jam is occurred, or an error message or code is displayed, execute this test to locate
the damaged parts.
The test will execute the DI Test codes of the components that are supposed to be faulty from the
error details. (Refer to each FIP on Chapter 1.)
Test result: NG (Go to each FIP or replace the parts.)
OK (Turn off/on the main power.)
4.3.2 Executing digital input (DI) test
1) Turn off the power.
2) Turn on the power while holding down “  ” and “  ” keys.
3) Release the fingers from these keys when “Please wait...” is displayed.
4) The “Customer Mode”, “FAX/Scanner Diag” and “Printer Diag” are displayed. (Entered the
Diag. mode.)
5) Press “  ” to select “Printer Diag”, and press “ 3 ” key.
6) Press “  ” to select “IOT Diag”, and then press “ 3 ” key.
7) Press “  ” key to select “Digital Input”, and then press “ 3 ” key.
8) Press “  ” or “  ” key to select the test item.
9) Press “ 3 ” key twice to execute the test.
Parameters for the Digital Input Test are as follows.
Code Components
DI-1 Dup Jam sensor
DI-2 Exit Sensor
DI-3 Regi Sensor
DI-4 ROS Ready (Not Used)
DI-7 Front Cover Interlock Switch
DI-8 Yellow Toner Cartridge Sensor
DI-9 Magenta Toner Cartridge Sensor
DI-a Black Toner Cartridge Sensor
DI-b Cyan Toner Cartridge Sensor
DI-d Tray 2 No Paper sensor
DI-e Duplex Fan Alarm (Not Used)
DI-f Teay 2 Feed Motor Alarm (Not Used)

Dell 3115CN Specifications

General

Print technology	Laser
Maximum resolution	600 x 600 DPI
Time to first page (black, normal)	16 s
Time to first page (color, normal)	17 s
Print speed (black, normal quality, A4/US Letter)	30 ppm
Print speed (color, normal quality, A4/US Letter)	17 ppm
Digital sender	No
Maximum duty cycle	60000 pages per month
Number of print cartridges	4
Scanner type	Flatbed scanner
PC free copying	Yes
Faxing	Mono faxing
Fax memory	4 MB
Modem speed	33.6 Kbit/s
Fax speed dialing (max numbers)	200
Multi-Purpose tray input capacity	150 sheets
Sound power level (standby)	40 dB
Sound pressure level (printing)	52 dB
Display	LCD
Market positioning	Business
Safety	IEC/EN60950-1:2001; IEC60825-1; CE Mark (EU); NEMKO; GS Mark; GOST & Hygienic; SASO; SABS; UL/cUL Listed; FDA/DHHS
Dimensions (WxDxH)	460 x 570 x 730 mm
Power requirements	220-240V, 47 - 63 Hz
Networking features	Ethernet 10/100 BaseT
Wireless technology	IEEE 802.11b/g
All-in-one functions	Copy, Fax, Scan
Maximum internal memory	1152 GB
Color all-in-one functions	print, scan
Compatible operating systems	Windows Vista/Vista x64, Microsoft Windows XP SP1-2, XP 64 bit, NT 4.0 SP6a, 2000 SP2-4, Server 2003 SP1, Server 2003 x64, Mac OS X, UNIX (SolarisTM 10, HP-UX11i), Linux (Red Hat 8/9, SuSE 9, TurboLinux 10)
Paper tray media types	Card stock, Coated paper, Envelopes, Labels, Plain paper, Recycled paper, Transparencies
ISO A-series sizes (A0...A9)	A4, A5
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Supported network protocols (IPv4)	DellTCP/IP & UDP/IP (LPD, Port9100, IPP6, SMB6, Netware v 5, FTP, HTTP, HTTPS6, RARP, AutoIP, WINS6, SMTP, FTP, DDNS6, SNMP, DHCP, BOOTP, mDNS6); NetBEUI (SMB6); Netware P-server6; Ethertalk6; AppleTalk
Standard interfaces	USB 2.0
Bundled software	ScanSoft PaperPort v10, Dell Printer Configuration Web Tool, Dell Colour Track 2, Dell Toner Management System
Sustainability certificates	ENERGY STAR
Power consumption (off)	0 W
Power consumption (standby)	108 W
Power consumption (PowerSave)	18 W
Power consumption (average operating)	465 W
Storage temperature (T-T)	0 - 35 °C
Operating temperature (T-T)	5 - 32 °C
Storage relative humidity (H-H)	15 - 80 %
Operating relative humidity (H-H)	15 - 85 %
Certification	CE; EN55022:1994 Class B+A1:1995+A2:1997; EN61000-3-2:2000+A2:2005; EN 61000-3-3:1995+A1:2001; EN55024:1998+A1:2001+A2:2003; FCC CFR; ICES-003; GOST; SABS