Dell C6522QT User Manual

About your display | 25
Plug-and-Play
You can install the display in any Plug-and-Play-compatible system. The display
automatically provides the computer system with its extended display identification
data (EDID) using display data channel (DDC) protocols so the computer can configure
itself and optimize the display settings. Most display installations are automatic; you
can select different settings if desired. For more information about changing the
display settings, see Operating the Display.
LCD Display Quality and Pixel Policy
During the LCD display manufacturing process, it is not uncommon for one or more
pixels to become fixed in an unchanging state which are hard to see and do not affect
the display quality or usability. For more information on LCD Display Pixel Policy, see
Dell support site at: https: //www.dell.com/pixelguidelines.
Maintenance guidelines
Cleaning your display
WARNING: Before cleaning the display, unplug the display power cable
from the electrical outlet.
CAUTION: Read and follow the Safety Instructions before cleaning the
display.
For best practices, follow these instructions in the list below while unpacking, cleaning,
or handling your display:
• To clean your anti-static screen, lightly dampen a soft, clean cloth with water. If
possible, use a special screen-cleaning tissue or solution suitable for the anti-static
coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed
air.
• Use a lightly-dampened, soft cloth to clean the display. Avoid using detergent of
any kind as some detergents leave a milky film on the display.
• If you notice white powder when you unpack your display, wipe it off with a cloth.
• Handle your display with care as a darker-colored display may get scratched and
show white scuff marks more than a lighter- colored display.
• To help maintain the best image quality on your display, use a dynamically changing
screen saver and turn off your display when not in use.

Dell C6522QT Specifications

General

Color gamut	72 %
Pixel pitch	0.372 x 0.372 mm
Response time	9 ms
Display diagonal	64.53 \
Display brightness	350 cd/m²
Display technology	LCD
Native aspect ratio	16:9
Native refresh rate	60 Hz
Vertical scan range	24 - 75 Hz
Horizontal scan range	30 - 140 kHz
Contrast ratio (typical)	1300:1
Display number of colors	1.073 billion colors
Display diagonal (metric)	163.906 cm
Active display area (W x H)	1428.5 x 803.5 mm
Number of simultaneous touchpoints	20
DVI port	No
USB version	3.2 Gen 1 (3.1 Gen 1)
USB connector type	USB Type-C
USB ports quantity	8
HDMI ports quantity	3
VGA (D-Sub) input ports	0
Orientation	Horizontal
Product color	Black
Product design	Interactive flat panel
Bezel width (top)	44.7 mm
Placement supported	Indoor
Panel mounting interface	400 x 400 mm
RMS rated power	40 W
Speaker impedance	8 Ω
Speaker frequency range	120 - 20000 Hz
Number of built-in speakers	2
Purpose	Corporate
AC input voltage	100 - 240 V
Heat dissipation	316.99 BTU/h
AC input frequency	50 - 60 Hz
Power consumption (max)	350 W
Power consumption (standby)	0.3 W
Power consumption (typical)	92.9 W
Package weight	55500 g
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 80 %
Harmonized System (HS) code	85285210

Weight and Dimensions

Depth	78.7 mm
Width	1517.88 mm
Height	892.92 mm
Weight	45200 g
Display width	- mm
Display weight	- g