EasyManuals Logo
Home>Dell>Monitor>C6522QT

Dell C6522QT User Manual

Dell C6522QT
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
32 | Setting up the display
Wall mounting
(Screw dimension: M8 x 35 mm).
Refer to installation instruction that comes with the 3rd party wall mount that customer
purchases. Vesa-compatible base mounting kit (400 x 400) mm.
1. Install Wall Plate to Wall.
2. Place the display panel on a soft cloth or cushion on a stable at table.
3. Attach the mounting brackets from the wall mounting kit to the display.
4. Install Display to Wall Plate.
5. Ensure display is mounted vertically with no tilt forward or backward and a leveler
is used to assist to mount the display.
NOTE:
• Do not attempt to wall mount the Touch Display by yourself. It should be
installed by qualified installers.
• Recommended Wall Mount for this Display can be found in the Dell
support website at dell.com/support.
NOTE: For use only with UL or CSA or GS-listed wall mount bracket with
minimum weight/load bearing capacity of the product.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell C6522QT and is the answer not in the manual?

Dell C6522QT Specifications

General IconGeneral
Color gamut72 %
Pixel pitch0.372 x 0.372 mm
Response time9 ms
Display diagonal64.53 \
Display brightness350 cd/m²
Display technologyLCD
Native aspect ratio16:9
Native refresh rate60 Hz
Vertical scan range24 - 75 Hz
Horizontal scan range30 - 140 kHz
Contrast ratio (typical)1300:1
Display number of colors1.073 billion colors
Display diagonal (metric)163.906 cm
Active display area (W x H)1428.5 x 803.5 mm
Number of simultaneous touchpoints20
DVI portNo
USB version3.2 Gen 1 (3.1 Gen 1)
USB connector typeUSB Type-C
USB ports quantity8
HDMI ports quantity3
VGA (D-Sub) input ports0
OrientationHorizontal
Product colorBlack
Product designInteractive flat panel
Bezel width (top)44.7 mm
Placement supportedIndoor
Panel mounting interface400 x 400 mm
RMS rated power40 W
Speaker impedance8 Ω
Speaker frequency range120 - 20000 Hz
Number of built-in speakers2
PurposeCorporate
AC input voltage100 - 240 V
Heat dissipation316.99 BTU/h
AC input frequency50 - 60 Hz
Power consumption (max)350 W
Power consumption (standby)0.3 W
Power consumption (typical)92.9 W
Package weight55500 g
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 80 %
Harmonized System (HS) code85285210
Weight and Dimensions IconWeight and Dimensions
Depth78.7 mm
Width1517.88 mm
Height892.92 mm
Weight45200 g
Display width- mm
Display weight- g

Related product manuals