Steps
1. Locate the notch on the 2230 solid-state drive/Intel Optane memory.
2. Align the notch on the 2230 solid-state drive/Intel Optane memory with the tab on the M.2 card slot.
3. Slide the 2230 solid-state drive/Intel Optane memory into the M.2 card slot on the system board.
4. Replace the screw (M2x3) that secures the 2230 solid-state drive/Intel Optane memory to the system board.
Next steps
1. Install the left-side cover.
2. Follow the procedure in After working inside your computer.
NOTE:
Enable the Intel Optane memory after you replace the Intel Optane memory module. For more information about
enabling the Intel Optane memory, see Enabling Intel Optane memory.
Graphics card
Removing the graphics card
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the left-side cover.
About this task
The following images indicate the location of the graphics card and provides a visual representation of the removal procedure.
36
Disassembly and reassembly
To Next Page
Loading...
Need help?
General
