Wireless options
Table 14. Wireless
Option Description
Wireless Device Enable
Allows you to enable or disable the internal wireless devices.
The options are:
• WLAN/WiGig
• Bluetooth
All the options are enabled by default.
Maintenance
Table 15. Maintenance
Option Description
Service Tag
Displays the service tag of your computer.
Asset Tag
If an asset tag is not set, this option enables you to create a system asset tag.
This option is disabled by default.
SERR Messages Controls the SERR message mechanism. This option is set by default. Some graphics cards require that
the SERR message mechanism be disabled.
BIOS Downgrade
Allows you to flash previous revisions of the system firmware.
The option Allow BIOS Downgrade is enabled by default.
Data Wipe This option enables you to securely erase data from all the internal storage devices. The process adheres
to SerialATA Security Erase and eMMC JEDEC Sanitize specifications. The option Wipe on Next Boot is
disabled by default.
Bios Recovery
BIOS Recovery from Hard Drive—This option is set by default. Allows you to recover the corrupted
BIOS from a recovery file on the hard drive or an external USB drive.
BIOS Auto-Recovery—Allows you to recover the BIOS automatically.
First Power On Date Allows you the set Ownership date. The option Set Ownership Date is not set by default.
System logs
Table 16. System Logs
Option Description
BIOS events
Allows you to view and clear the System Setup (BIOS) POST events.
Advanced configuration
Table 17. Advanced configuration
Option Description
ASPM Allows you to set the ASPM level.
• Auto (default) - There is handshaking between the device and PCI Express hub to determine the
best ASPM mode supported by the device
76 System setup
To Next Page
Loading...
Need help?
General
