Setting Up the Monitor 23
Connecting Your Monitor
WARNING: Before you begin any of the procedures in this section, follow
the Safety Instructions.
To connect your monitor to the computer:
1. Turn o your computer and disconnect the power cable.
2. Connect the black VGA or DisplayPort cable to the corresponding video
port on the back of your computer. Do not use all cables at the same
time. Use the all cables only when they are connected to dierent
computers with appropriate video systems.
Connecting VGA Cable
Connecting DP cable
NOTE: The graphics are used for the purpose of illustration only. Appearance on the
computer may vary.
To Next Page
Loading...
