Dell E525w - Ghosting

Troubleshooting 295
Ghosting
Action Yes No
1 Adjust the transfer bias.
a Launch the Tool Box , and click Registration Adjustment on the
Printer Maintenance tab.
b Click Chart Print .
c Click Ghost Configuration Chart .
The ghost configuration chart is printed.
d Click Adjust Transfer Roller .
e Select the Transfer Roller Refresh Mode check box, and then click
Apply New Settings .
f Click Registration Adjustment on the Printer Maintenance tab.
g Click Chart Print .
h Click Ghost Configuration Chart .
The ghost configuration chart is printed.
Is the problem recovered?
The task is complete. Go to action 2.
2 The print media surface may be uneven. Try changing the Paper Type
setting in the printer driver. For example, change the plain paper to
thick.
a On the General or Paper/Output tab in Printing Preferences of the
printer driver, change the
Paper Type setting.
Is the problem recovered?
The task is complete. Go to action 3.
3 Adjust the fusing unit temperature.
a Launch the Tool Box , and click Adjust Fusing Unit on the Printer
Maintenance
tab.
b Adjust the fixing temperature by turning up the value for your
printing media.
c Click Apply New Settings .
Is the problem recovered?
The task is complete. Go to action 4.
4 If you use non-recommended print media, use the print media
recommended for the printer.
Is the problem recovered?
The task is complete. Contact Dell.