Palmrest assembly
Removing the palmrest assembly
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the SIM card
4. Remove the base cover.
5. Remove the solid-state drive.
6. Remove the WWAN card.
7. Remove the battery.
8. Remove the heatsink assembly.
9. Remove the display assembly.
10. Remove the speaker.
11. Remove the smart card reader.
12. Remove the audio board.
13. Remove the system board.
14. Remove the I/O board.
15. Remove the power button with finger print reader.
16. Remove the keyboard.
Steps
After performing the pre-requisite steps, you are left with the palmrest assembly.
Installing the palmrest assembly
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the palmrest assembly and provides a visual representation of the installation
procedure.
58
Removing and installing components