EasyManuals Logo

Dell M410HD User Manual

Dell M410HD
59 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
Troubleshooting Your Projector 41
4
Troubleshooting Your Projector
If you experience problems with your projector, see the following troubleshooting
tips. If the problem persists, contact Dell™. See Contacting Dell™ on page 53.
Problem Possible Solution
No image appears on the
screen
Ensure that the lens cap is removed and the
projector is turned on.
Ensure that you have chosen the correct
input source on the INPUT SELECT
menu.
Ensure the external graphics port is
enabled. If you are using a Dell™ Laptop
computer, press (Fn+F8). For
other computers, see your respective
documentation. If images are not displayed
properly, please upgrade the video driver of
your computer. For Dell computer, see
support.dell.com.
Ensure that all the cables are securely
connected. See "Connecting Your
Projector" on page 8.
Ensure that the pins of the connectors are
not bent or broken.
Ensure that the lamp is securely installed
(see "Changing the Lamp" on page 47).
•Use Test Pattern in the Others menu.
Ensure that the colors of the test pattern
are correct.
Missing Input Source.
Cannot switch to particular
Input Source.
Go to Advanced Enable/Disable Sources,
ensure that particular Input Source is set to
Enable.

Other manuals for Dell M410HD

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell M410HD and is the answer not in the manual?

Dell M410HD Specifications

General IconGeneral
Projection distance1 - 12 m
Projection technologyDLP
Contrast ratio (typical)2100:1
Projector native resolutionWXGA (1280x800)
Lamp power165 W
Light source typeLamp
Service life of light source3000 h
Service life of light source (economic mode)5000 h
Audio input1
Dimensions (WxDxH)205 x 155 x 75.9 mm
Power requirementsAC 100-240 50-60Hz
Analog signal format systemNTSC, PAL, SECAM
RMS rated power1 W
AC (power) inYes
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Power consumption (typical)210 W
Storage temperature (T-T)0 - 60 °C
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)80 - 90 %
Weight and Dimensions IconWeight and Dimensions
Weight1180 g

Related product manuals