Dell OptiPlex XE User Manual

Back to Contents Page
Secondary Hard Drive
Dell™OptiPlex™XEServiceManual—Desktop
Removing the Secondary Hard Drive
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the optical drive.
3. Pull up the drive release latch, and then slide the hard drive toward the front of the computer.
4. Lift the hard drive and place it on the power supply.
5. Disconnect the power and data cables from the hard drive.
6. Remove the hard drive from the computer.
Replacing the Secondary Hard Drive
To replace the secondary hard drive, perform the above steps in reverse order.
Back to Contents Page
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE: You may need to install Adobe®Flash®Player from Adobe.com in order to view the illustrations below.

Dell OptiPlex XE Specifications

General

Brand	Dell
Model	OptiPlex XE
Category	Desktop
Language	English