Step
Align the display bezel with the display back-cover and antenna assembly, and gently snap the display bezel into place.
Next step
1 Install the display assembly.
2 Install the WLAN card.
3 Install the battery.
4 Install the base cover.
5 Follow the procedure in After working inside your computer.
Display panel
Removing the display panel
Prerequisites
NOTE
: This procedure is not applicable to computers shipped with a WWAN conguration.
1 Follow the procedure in Before working inside your computer.
2 Remove the base cover.
3 Remove the battery.
4 Remove the WLAN card.
5 Remove the display assembly.
6 Remove the display bezel.
50
Removing and installing components
To Next Page
Need help?
General
