3. Install the base cover.
4. Follow the procedure in After working inside your computer.
Removing the speakers (tweeters)
Prerequisites
1. Follow the procedure in Before working inside your computer.
NOTE: Ensure that your computer is in Service Mode. For more information see, step 6 in Before working inside your
computer.
2. Remove the base cover.
About this task
The following image(s) indicate the location of the speakers (tweeters) and provides a visual representation of the installation
procedure.
Steps
1. Disconnect the speaker (tweeters) cable from the system board.
2. Lift the speakers (tweeters) and their cables off the palm-rest and keyboard assembly.
Installing the speakers (tweeters)
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image(s) indicate the location of the speakers (tweeters) and provides a visual representation of the installation
procedure.
48
Removing and installing components
To Next Page
Loading...
Need help?
General
