Replacing the optical-drive
interposer
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
Align the optical-drive interposer with the tabs on the computer base and
snap it into place.
Post-requisites
1 Follow the procedure from step 3 to step 8 in "Replacing the computer
base".
2 Follow the procedure from step 4 to step 7 in “Replacing the optical
drive”.
3 Replace the keyboard.
4 Replace the wireless card.
5 Follow the procedure from step 4 to step 6 in “Replacing the hard drive”.
6 Replace the base cover.
7 Replace the battery.
52
To Next Page
Loading...
Need help?
General
