Dell P28E User Manual

Removing the power-adapter
port
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1 Remove the battery.
2 Remove the base cover.
3 Follow the procedure from step 1 to step 3 in “Removing the hard drive”.
4 Remove the wireless card.
5 Remove the memory modules.
6 Remove the keyboard.
7 Follow the procedure from step 1 to step 4 in “Removing the optical
drive”.
8 Follow the procedure from step 1 to step 6 in “Removing the computer
base”.
9 Remove the I/O board.
10 Remove the heat-sink assembly.
11 Remove the system board.
Procedure
1 Note the power-adapter-port cable routing and remove it from the
routing guides on the palm-rest assembly.
2 Remove the screw that secures the power-adapter port to the palm-rest
assembly.
3 Peel off the tape that secures the power-adapter port to the palm-rest
assembly.
70

Dell P28E Specifications

General

Brand	Dell
Model	P28E
Category	Laptop
Language	English