Removing the display back-cover
and antenna assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the battery.
2 Follow the procedure from step 1 to step 3 in Removing the optical drive
3 Remove the keyboard.
4 Follow the procedure from step 1 to step 7 in “Removing the base cover”.
5 Remove the wireless card.
6 Remove the display assembly.
7 Remove the display bezel.
8 Remove the display panel.
9 Remove the display hinges.
10 Remove the camera.
Procedure
NOTE: These instructions are applicable only for laptops with a non-touch
screen display.
After performing the steps mentioned in the prerequisites, we are left with the display
back-cover and antenna assembly.
105