Dell P93F User Manual

Steps
1. Place the display hinge in its slot on the display assembly.
2. Replace the eight (M2.5x2.5) screws to secure the display hinge to the display assembly.
Next steps
1. Install the display panel.
2. Install the display bezel.
3. Install the display assembly.
4. Install the middlecap.
5. Install the speakers.
6. Install the system board.
7. Install the inner frame.
8. Install the heat-sink assembly.
9. Install the GPU card.
10. Install the GPU power cable.
11. Install the SD card reader.
12. Install the keyboard.
13. Install the keyboard lattice.
14. Install the SIM card.
15. Install the primary memory.
16. Install the WWAN card.
17. Install the WLAN card.
18. Install the secondary memory.
19. Install the primary M.2 SSD.
20. Install the battery.
21. Install the base cover.
22. Install the secondary M.2 SSD.
23. Install the SD card.
24. Follow the procedure in after working inside your computer.
Camera shutter cap
Removing camera shutter cap
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the SD card.
3. Remove the secondary M.2 SSD.
4. Remove the base cover.
5. Remove the battery.
6. Remove the SIM card.
7. Remove the secondary memory.
8. Remove the WLAN card.
9. Remove the WWAN card.
10. Remove the primary M.2 SSD.
11. Remove the keyboard lattice.
12. Remove the keyboard.
13. Remove the SD card reader.
14. Remove the GPU power cable.
15. Remove the GPU card.
16. Remove the primary memory.
17. Remove the heat-sink assembly.
18. Remove the inner frame.
106
Removing and installing components

Dell P93F Specifications

General

Brand	Dell
Model	P93F
Category	Laptop
Language	English