5. Install the GPU power cable.
6. Install the keyboard.
7. Install the keyboard lattice.
8. Install the SIM card.
9. Install the primary memory.
10. Install the WWAN card.
11. Install the WLAN card.
12. Install the secondary memory.
13. Install the primary M.2 SSD.
14. Install the battery.
15. Install the base cover.
16. Install the secondary M.2 SSD.
17. Install the SD card.
18. Follow the procedure in after working inside your computer.
Display assembly
Removing the display assembly
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the SD card.
3. Remove the secondary M.2 SSD.
4. Remove the base cover.
5. Remove the battery.
6. Remove the SIM card.
7. Remove the secondary memory.
8. Remove the WLAN card.
9. Remove the WWAN card.
10. Remove the primary M.2 SSD.
11. Remove the keyboard lattice.
12. Remove the keyboard.
13. Remove the primary memory.
14. Remove the heat-sink assembly.
15. Remove the system board.
16. Remove the power-adapter port.
About this task
The figure indicates the location of the display assembly and provides a visual representation of the removal procedure.
Removing and installing components
87
To Next Page
Loading...
Need help?
General
